CTS RWD V6-3.6L (2008)
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair) .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
3. Remove the shock module from the vehicle. Refer to Shock Absorber and Spring Assembly Replacement (See: Shock Absorber and Spring
Assembly Replacement) .
4. Install the shock module into the spring compressor.
5. Mark the upper control arm assembly and insulator for proper installation.
Important: The spring is compressed when the shock absorber moves freely.
6. Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.
7. Remove the shock absorber upper retaining nut.
8. Remove the shock absorber from the shock module.
9. Loosen the compressor forcing screw until the upper mounting plate and coil spring may be removed.
