CTS RWD V6-3.6L (2008)
3. Hand tighten the wheel bearing/hub assembly mounting bolts (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Tighten the wheel bearing/hub bolts.
Tighten the wheel bearing/hub bolts to 135 N.m (100 lb ft).
5. Install the upper control arm bolt to the knuckle. Refer to Upper Control Arm Replacement (See: Suspension/Control Arm/Service and
Repair/Rear Suspension/Upper Control Arm Replacement) .
6. Install the rear brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement) .
7. Install the wheel drive shaft nut.
*
For the left wheel drive shaft, refer to Front Wheel Drive Shaft Replacement - Left Side () .
*
For the right wheel drive shaft, refer to Front Wheel Drive Shaft Replacement - Right Side () .
8. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement (See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement) .
9. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
10. Remove the support and lower the vehicle.