CTS RWD V6-3.6L (2008)
7. Remove the propeller shaft flange holding fixture J 45012 .
8. Install the transmission mount assembly. Refer to Transmission Mount Replacement (See: Transmission Mount/Service and Repair) .
9. Remove the transmission jack.
10. Install the drive shaft. Refer to Rear Propeller Shaft Replacement (RWD) (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair)Rear Propeller Shaft Replacement (AWD) (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair) .
11. Install the exhaust system. Refer to Exhaust System Replacement (With LY7 and LLT) (See: Engine, Cooling and Exhaust/Exhaust
System/Service and Repair/Exhaust System Replacement (With LY7 and LLT))Exhaust System Replacement (With LP1) (See: Engine, Cooling
and Exhaust/Exhaust System/Service and Repair/Exhaust System Replacement (With LP1)) .
12. Lower the vehicle.
