CTS RWD V6-3.6L (2008)
Control Module: Service and Repair
Control Solenoid Valve and Transmission Control Module Assembly Replacement
Removal Procedure
Important: The valve body must be removed from the transmission to replace the control solenoid valve and transmission control module
assembly.
1. Remove the transmission oil pan and filter. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (See: Service and
Repair/Removal and Replacement) .
2. Remove the electrical connector passage sleeve. Refer to Automatic Transmission Electrical Connector Passage Sleeve Replacement (See: Seals
and Gaskets/Service and Repair/Automatic Transmission Electrical Connector Passage Sleeve Replacement) .
3. Remove the valve body bolts (1).
