CTS RWD V8-6.2L SC (2009)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement (RHD)
Brake Pedal Assembly Replacement (RHD)
Removal Procedure
1. Remove the power vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement (LHD) (See: Power Brake Assist/Vacuum Brake
Booster/Service and Repair/Power Vacuum Brake Booster Replacement (LHD))Power Vacuum Brake Booster Replacement (RHD) (See: Power
Brake Assist/Vacuum Brake Booster/Service and Repair/Power Vacuum Brake Booster Replacement (RHD)).
2. Without disconnecting the steering column from the intermediate shaft, lower and support the steering column. Refer to Steering Column
Replacement (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Replacement).
3. Disconnect the brake pedal position sensor (1) electrical connector.
4. Remove the power vacuum brake booster pushrod nut (1).
