CTS RWD V8-6.2L SC (2009)
*
Allow the threadlocker to cure approximately 10 minutes before installation.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the brake caliper bracket bolts (1) and tighten to 230 Nm (170 lb ft).
4. Install the brake pad springs.
5. Install the outer brake pad (1).
6. Install the inner brake pad (2).
Note: If reusing the caliper bracket bolts the threads of the caliper bracket bolts and the threads of the knuckle mounting holes must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
7. Prepare the bolts and the threaded holes for assembly:
*
Thoroughly clean the residue from the bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the threaded holes by using denatured alcohol or equivalent and allow to dry.
