CTS RWD V8-6.2L SC (2009)
7. Disconnect the right rear (1), left rear (2), and the right front (3) brake pipe fittings from the BPMV.
Cap the brake pipe fittings and plug the BPMV outlet ports to prevent brake fluid loss and contamination.
8. Remove the BPMV assembly bracket bolt (1).
9. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
10. Remove the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair/Front Air Deflector Replacement).
11. Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair).
12. Remove the washer solvent container fasteners and position the washer solvent container aside. Refer to Windshield Washer Solvent Container
Replacement (With CE4) (See: Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent
Container Replacement (With CE4))Windshield Washer Solvent Container Replacement (Without CE4) (See: Wiper and Washer
Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent Container Replacement (Without CE4)).