CTS RWD V8-6.2L SC (2009)
Parking Brake Cable: Removal and Replacement
Parking Brake Rear Cable Replacement - Right Side (Without Electronic Park Brake)
Parking Brake Rear Cable Replacement - Right Side (Without Electronic Park Brake)
Special Tools
J-37043 - Park Brake Cable Release Tool
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service
and Repair).
3. Remove the exhaust system. Refer to Exhaust System Replacement (With LY7 or LLT) (See: Engine, Cooling and Exhaust/Exhaust
System/Service and Repair).
4. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
5. Disconnect the intermediate park brake cable (2) from the park brake connector (1).
6. Disconnect the right rear park brake cable (2) from the intermediate park brake cable connector (3).
7. Use the J-37043 - Park Brake Cable Release Tool to compress the right rear brake cable retainer.
8. Remove the right rear park brake cable (2) from the right rear park brake cable bracket (1).
9. Use the J-37043 - Park Brake Cable Release Tool to compress the right rear brake cable retainer.
10. Remove the right rear park brake cable from the right rear cable bracket (1).
