CTS RWD V8-6.2L SC (2009)
3. Install the camshaft sprocket (205) and timing chain (208).
Recheck the alignment of the timing marks.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the camshaft sprocket bolts (206) and tighten to 30 Nm (22 lb ft).
5. Apply a 5 mm (0.2 in) bead of sealant 20 mm (0.8 in) long to the oil pan to engine block junction. Refer to Adhesives, Fluids, Lubricants, and
Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and Sealers) for the correct part number.
6. Install the front cover (502) and a new gasket (503).
7. Install the front cover bolts (501) until snug.
