CTS RWD V8-6.2L SC (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the drain plug.
Tighten the drain plug to 25 Nm (18 lb ft).
2. Install the engine oil level sensor.
Tighten the drain plug to 20 Nm (15 lb ft).
3. Reconnect the electrical connector (1).
4. Lower the vehicle.
5. Refill the engine. Refer to Approximate Fluid Capacities (See: Maintenance/Service Intervals).
