CTS RWD V8-6.2L SC (2009)
10. Remove the oil seal (140).
11. Remove the bolt (705), camshaft position (CMP) sensor (703).
12. Remove the O-ring (704) from the sensor, as required.
Installation Procedure
1. Apply a 5 mm (0.2 in) bead of sealant 20 mm (0.8 in) long to the engine block. Apply the sealant to the T joint location (a) where the oil pan meets
the front of the engine block. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and Sealers)
for the correct part number.