cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Air Conditioning Line/Tube Connector Removal/Replacement|Page 14297 > < Air Conditioning Line/Tube Connector Removal/Replacement|Page 14295
Page 1
background image

Hose/Line HVAC: Service and Repair
Discharge Hose Replacement

Discharge Hose Replacement (LSA) (6.2 L)

Removal Procedure

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging   (See: Service and Repair/Refrigerant Recovery and Recharging).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair)
3. Remove the front air deflector. Refer to Front Air Deflector Replacement   (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service

and Repair/Front Air Deflector Replacement)

4. Remove the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (All Wheel Drive)   (See: Body

and Frame/Splash Guard/Service and Repair/Front Compartment Lower Noise Shield Replacement)Front Compartment Lower Noise Shield
Replacement (Rear Wheel Drive)   (See: Body and Frame/Splash Guard/Service and Repair/Front Compartment Lower Noise Shield Replacement
)

5. Remove the discharge hose bolt (1) at the compressor.
6. Remove the discharge hose (2) from the compressor.

Air Conditioning Line/Tube Connector Removal/Replacement|Page 14297 > < Air Conditioning Line/Tube Connector Removal/Replacement|Page 14295