CTS RWD V8-6.2L SC (2009)
2. Install the parking brake indicator switch assembly to the parking brake lever.
Align the pin on the indicator switch to the locator hole on the parking brake lever.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the parking brake indicator switch bolt to 2 Nm (18 lb in).
4. Connect the parking brake indicator switch electrical connector.
5. Install the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (Left Hand Drive) (See: Dashboard /
Instrument Panel/Service and Repair)Instrument Panel Insulator Replacement - Left Side (Right Hand Drive) (See: ).