CTS RWD V8-6.2L SC (2009)
Oil Filter: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Open the hood.
2. Remove the oil fill cap.
3. Remove the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (All Wheel Drive) (See: Body
and Frame/Splash Guard/Service and Repair/Front Compartment Lower Noise Shield Replacement)Front Compartment Lower Noise Shield
Replacement (Rear Wheel Drive) (See: Body and Frame/Splash Guard/Service and Repair/Front Compartment Lower Noise Shield Replacement
)
4. Remove the oil pan drain plug (3).
5. Drain the engine oil into an appropriate container.
6. Remove the engine oil filter (1) from the engine block (2).
Installation Procedure