CTS RWD V8-6.2L SC (2009)
12. Remove the bolt (2) from the power steering gear flange (3) and separate the gear inlet hose (1) from the steering gear flange.
13. Remove the bolt (2) from the gear inlet hose latch plate (3).
14. Reposition the plate.
15. Remove the gear inlet hose (1) from the steering gear.
16. Remove the gear inlet hose from the vehicle.
17. Remove the O-ring seal from the gear inlet hose-to-steering gear fitting.
Discard the O-ring seal.
Installation Procedure
1. Install a NEW O-ring seal to the gear inlet hose-to-steering gear fitting.
2. Position the power steering gear inlet hose in the vehicle.
