CTS RWD V8-6.2L SC (2009)
3. install the fuel rail wit the fuel injector harness (2) to the engine.
4. Carefully locate the fuel injectors into the supercharger. Install the left side first and then the right side.
5. Apply threadlock to the ball stud and fastener threads. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Engine, Cooling and
Exhaust/Engine/Specifications/Adhesives, Fluids, Lubricants, and Sealers).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Instal the ball studs (1) and the forward fastener and tighten to 10 Nm (89 lb in).
7. Connect all 8 ignition coil harness connectors (1).
