CTS RWD V8-6.2L SC (2009)
Transmission Temperature Sensor/Switch: Service and Repair
Transmission Fluid Temperature Sensor Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the transmission fluid temperature (TFT) sensor electrical connector.
3. Clean away all dirt and debris from the TFT sensor.
4. Place a suitable drain pan under the transmission.
5. Remove the TFT sensor (4).
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).