CTS RWD V8-6.2L SC (2009)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement - Right Side
Fuel Level Sensor Replacement - Right Side
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel/Service Precautions).
1. Remove the fuel tank pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Right Side (See: Powertrain Management/Fuel
Delivery and Air Induction/Fuel Pump/Service and Repair).
Note: Do not pull on the connector wires.
2. Press in the locking tab (1) and disconnect the fuel level sensor electrical connector.
3. Disconnect the fuel level sensor electrical connector (1).