CTS RWD V8-6.2L SC (2009)
13. Push the rubber grommet in the dashboard pass-through to dislocate it from its installed position.
14. Remove the windshield washer solvent heater. Refer to Windshield Washer Solvent Heater Replacement (See: Wiper and Washer
Systems/Washer Fluid Heater/Service and Repair).
15. In the engine compartment, untape the body harness as needed and separate the battery positive cable from it.
16. Remove the battery positive cable from the body harness and the vehicle.
Installation Procedure
1. Position the battery positive cable to the vehicle and the body harness.
2. In the engine compartment, align the battery positive cable to the body harness and tape it as needed.
3. Install the rubber grommet in the dashboard pass-through.