CTS RWD V8-6.2L SC (2009)
6. Using the J 45019 - remover (1), remove the flange.
Note: Do not damage the sealing surfaces of the pinion shaft or differential pinion housing.
7. Using the appropriate tool, remove the drive pinion seal (2) from the differential housing (1).
Installation Procedure
1. Remove any debris and excess gear lubricant from the pinion bore.
2. Lubricate the drive pinion flange sealing surface with the gear lubricant. Refer to Adhesives, Fluids, Lubricants, and Sealers (See:
Specifications/Fluid Type Specifications/Adhesives, Fluids, Lubricants, and Sealers).
