CTS RWD V8-6.2L SC (2009)
10. Lower the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
11. Install the bolts (2) securing the shift control assembly to the adapter plate and tighten the bolts to 18 Nm (13 lb ft).
12. Install the sound insulator foam block into the console.
13. Install the shift control knob. Refer to Transmission Control Lever Knob Replacement (See: Transmission Control Lever Knob Replacement).
Shift Control Shift Closeout Boot Replacement
Shift Control Shift Closeout Boot Replacement
Removal Procedure
1. Remove the shift control knob/ boot assembly. Refer to Transmission Control Lever Knob Replacement (See: Transmission Control Lever Knob
Replacement).