CTS RWD V8-6.2L SC (2009)
7. Install the 5 remaining bolts (1) and 1 remaining bolt (2). Hand tighten only.
Caution: Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required
sequencing may result in transmission malfunction.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Tighten all bolts in the sequence shown. The 2 "heat sink" bolts (17,18) must be tightened last.
Tighten bolts to8 Nm (6 lb ft)..
