CTS Sedan AWD V6-3.0L (2010)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel
Air Inlet Grille Panel Replacement
Removal Procedure
1. Open the hood.
2. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service and
Repair).
3. Remove the rear hood seal from the hem flange on the air inlet grille panel.
4. Remove the screws (1) securing the passenger side air inlet panel (2) to the plenum.
5. Lift the passenger side air inlet grille panel (2) inward in order to disengage the three integral clips from the driver side panel.
6. Remove the air inlet panel from the vehicle.