cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Procedures|Page 12627 > < Sunroof / Moonroof Switch|Locations|Page 12622
Page 1
background image

Sunroof / Moonroof Track: Procedures

Sunroof Track Timing/Synchronization

Removal Procedure

1. Place the module in the closed/flush position.
2. Lower the headliner. Refer to Headlining Trim Panel Replacement (Wagon)   (See: Interior Moulding / Trim/Headliner/Service and Repair

)Headlining Trim Panel Replacement (Sedan)   (See: Interior Moulding / Trim/Headliner/Service and Repair).

3. Disconnect the electrical connector from the motor/actuator.
4. Remove the motor/actuator. Refer to Sunroof Motor/Actuator Replacement   (See: Sunroof / Moonroof Motor/Service and Repair).

5. Push the cam assembly (2) forward until the timing hole (3) in the cam is aligned with the timing hole (4) in the lifter arm (1).

Note:  Both mechanisms should now be in the closed position.

Procedures|Page 12627 > < Sunroof / Moonroof Switch|Locations|Page 12622