CTS Sedan AWD V6-3.0L (2010)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
Tools Required
EN-48018 Flywheel Holding Tool
Removal Procedure
1. Remove the A/C compressor and power steering pump drive belt. Refer to Water Pump and Generator Belt Tensioner Replacement (See: Drive
Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair/Water Pump and Generator Belt Tensioner Replacement).
2. Remove the generator and water pump drive belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Tensioner Replacement (
See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair/Air Conditioning Compressor and Power Steering
Pump Belt Tensioner Replacement).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the transmission bell housing inspection hole cover.
5. Install the EN-48018 flywheel holding tool as shown.
6. Remove the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair).
