CTS Sedan AWD V6-3.0L (2010)
15. The EN-48313 is now properly installed to hold the timing chain in position.
Note: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
16. Mark the timing chain and the respective locations on the camshaft position actuators (1-4).
17. Remove the camshaft position actuator bolt.
18. Remove the camshafts. Refer to Camshaft Removal - Left Side (See: Service and Repair/Overhaul/36. Camshaft Removal - Left Side).
Installation Procedure
