CTS Sedan AWD V6-3.0L (2010)
Tire Pressure Module: Service and Repair
Low Tire Pressure Indicator Module Replacement (RPO UH3)
Removal Procedure
1. Remove the left rear compartment trim. Refer to Rear Compartment Side Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Rear Compartment Side Trim Panel Replacement).
2. Depress the lock tab (1) for the tire pressure indicator monitoring module (TPIM) (3).
3. Slide the TPIM (3) over the lock tab (1) and remove it from the mounting bracket (2).
4. Lower the TPIM (3) and remove the electrical connector (4).
5. Remove the TPIM (2) from the vehicle.
Installation Procedure
