CTS Sedan AWD V6-3.0L (2010)
3. Position an appropriate container below the transmission drain plug.
4. Remove the transmission fluid drain plug (4) and washer (3). Discard the washer.
5. Allow the transmission fluid to drain into the container.
Caution: Refer to Component Fastener Tightening Caution (See: Service Precautions/Vehicle Damage Warnings/Component Fastener
Tightening Caution).
6. Install the transmission fluid drain plug (4) and a NEW washer (3) then tighten to 37 Nm (27 lb ft).
7. Remove the container used to catch the used transmission fluid from under the vehicle.
Filling Procedure
1. Clean away any dirt and debris from the transmission fluid fill plug area.
2. Remove the transmission fluid fill plug (2) and washer (1). Discard the washer.
3. Fill the transmission to just below the bottom of the fill plug hole with the recommended fluid. Refer to Lubrication Specifications (See:
Specifications/Mechanical Specifications/Manual Transmission/Transaxle/Aisin AY6 - Manual Transmission/Lubrication Specifications).
