CTS Sedan AWD V6-3.0L (2010)
‹› If greater than the specified range, test the ground circuit for an open/high resistance.
2. Ignition ON, verify a test lamp illuminates between the B+ circuit terminal 16 at the DLC and ground.
‹› If the test lamp does not illuminate, test the voltage supply circuit for a short to ground or an open/high resistance.
3. If all circuits test normal, refer to the scan tool/CANdi module user guide.
Repair Instructions
Perform the Diagnostic Repair Verification (See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests
and Procedures) after completing the repair.