CTS Sedan AWD V6-3.0L (2010)
14. Remove the transmission close out plug (1).
15. Mark the torque converter to flexplate/flywheel orientation to ensure proper realignment.
16. Remove the starter motor. Refer to Starter Replacement (LF1/LLT) (See: Starting and Charging/Starting System/Starter Motor/Service and
Repair)Starter Replacement (LSA) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair).
17. Repeat the following steps for all torque converter bolts (1):
1. Rotate the harmonic balancer center bolt clockwise ONLY, in order to align the torque converter bolt with the access hole.
2. Remove and discard the torque converter bolt.
