CTS Sedan AWD V6-3.0L (2010)
5. Thoroughly clean the wheel speed sensor mounting area of the suspension knuckle of any dirt and debris.
6. Remove the wheel speed sensor bolt (1) and the wheel speed sensor.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the wheel speed sensor and bolt (1) to the suspension knuckle and tighten to 9 Nm (80 lb in).
2. Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
3. Connect the wheel speed sensor electrical connector (2).
4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
