CTS Sedan AWD V6-3.0L (2010)
8. Remove the generator lower bolts (1).
9. Lower the vehicle.
10. Remove the generator upper bolt (2).
11. Remove the generator from the engine.
Installation Procedure
1. Install the generator to the engine.
2. Install the generator upper bolt (2) and tighten to 50 Nm (37 lb ft).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the generator lower bolts (1) and tighten to 50 Nm (37 lb ft).
