CTS Sedan AWD V6-3.0L (2010)
17. Adjust the jam nuts and adjustment link so that an equal amount of threads are showing on the inside and outside toe link rods. There should be
about 15 mm (19/32 in) showing on the inside and outside toe link rods.
18. Install the toe link assembly-to-knuckle joint bolt (5), and tighten to 160 Nm (118 lb ft).
19. Tighten the inside and outside jam nuts to 5 Nm (4 lb ft).
20. Install the left and right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in SI.
21. Perform an alignment. Inspect and adjust the toe. Refer to Rear Toe Adjustment in SI