CTS Sedan AWD V6-3.0L (2010)
12. Using the J 43631 - remover , separate the lower ball joint from the steering knuckle.
13. Remove the lower control arm from the vehicle.
Installation Procedure
1. Position the lower control arm (3) to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the front lower control arm mounting bolt (1) to tighten to 200 Nm (148 lb ft).
3. Install the rear lower control arm mounting bolt (2) to tighten to 320 Nm (236 lb ft).
4. Install the ABS wire harness to the lower control arm.
