CTS Sedan AWD V6-3.0L (2010)
3. Install the yoke to the shock.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the yoke to shock retaining bolt and nut.
*
Tighten the shock to yoke nut to 90 Nm (66 lb ft).
*
Tighten the yoke to lower control arm nut to 180 Nm (133 lb ft).
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
6. Lower the vehicle.