CTS Sedan AWD V6-3.0L (2010)
1. Install electrical connector (4) in the TPIM (3).
2. Install the TPIM (3) on the mounting bracket (2).
3. Using a flatbladed screw driver, ensure that the lock tab (1) is positioned properly to hold the TPIM (3) in place.
4. Install the left rear compartment trim. Refer to Rear Compartment Side Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Rear Compartment Side Trim Panel Replacement).
