CTS Sedan AWD V6-3.0L (2010)
5. Remove the support stand from under the engine oil pan.
6. Using the transmission jack. Lower the engine and transmission assembly only enough to gain access to the vent hose tube.
7. Install the vent hose (2) to the vent tube.
8. Position the engine wiring harness to the original location.
9. Raise the transmission to the installed position.
10. Install the bolts at the rear of the front frame and properly torque all frame bolts. Refer to Drivetrain and Front Suspension Frame Replacement
(All Wheel Drive) (See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair)Drivetrain and Front Suspension Frame
Replacement (Rear Wheel Drive) (See: Body and Frame/Frame/Subframe/Front Subframe/Service and Repair) for proper frame bolt tightening
information.
11. Install the transmission mount assembly. Refer to Transmission Mount Replacement (Except AWD and CTS-V) (See: Transmission Mount
Replacement)Transmission Mount Replacement (CTS-V) (See: Transmission Mount Replacement)Transmission Mount Replacement (Automatic
AWD) (See: Transmission Mount Replacement).
12. Remove the transmission jack.
