CTS Sedan AWD V6-3.0L (2010)
11. Remove the 2 nuts (2) securing the clutch pedal assembly to the brake pedal assembly.
12. Remove the nut (3) securing the clutch pedal assembly to the cowl.
13. Remove the clutch pedal assembly (1) from the vehicle.
14. Remove the clutch pedal position sensor from the pedal assembly, then disconnect the clutch pedal position sensor electrical connector.
Installation Procedure
1. Install the clutch pedal position sensor the pedal assembly, then connect the clutch pedal position sensor electrical connector.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the clutch pedal position sensor fastener then tighten 2.5 Nm (20 lb in)
3. Install the clutch pedal assembly (1) to the vehicle.
4. Install the nuts (2) securing the clutch pedal assembly to the brake pedal assembly and tighten to 20 Nm (15 lb ft).
5. Install the nut (3) securing the clutch pedal assembly to the cowl and tighten to 9 Nm (80 lb in).