CTS Sedan AWD V6-3.0L (2010)
6. Install the 2 bolts (1) securing the clutch pedal assembly to the I/P carrier and tighten to 20 Nm (15 lb ft).
7. Install the wiring harness retainer (2) to the clutch pedal assembly.
8. Install the wiring harness connector (1) to the clutch pedal position sensor.
9. Install the park brake pedal assembly. Refer to Parking Brake Lever Pedal Assembly Replacement (See: Brakes and Traction Control/Parking
Brake System/Parking Brake Lever/Service and Repair/Parking Brake Lever Pedal Assembly Replacement).