CTS Sedan AWD V6-3.0L (2010)
3. Discard the bearing.
Installation Procedure
1. Install a 5/8 inch washer (1) onto the J 38836 or equivalent. The washer serves as a stop against the crankshaft face and will assist in installing
the bearing to the proper depth.
2. Install the new pilot bearing (2) onto the tool.
3. Install a new pilot bearing into the crankshaft using the J 38836 .
4. Inspect the clutch pilot bearing for proper installation. A properly installed clutch pilot bearing will be installed until flush to the rear of the