CTS Sedan AWD V6-3.0L (2010)
Note: Ensure the boot clamp is securely closed and seated properly on the boot.
8. Using the J 42572 - pliers (3) and a ratchet wrench (2), close the boot clamp (1) until the gap (4) measures 1.0 mm (0.040 in)..
9. Move the CV joint in a circular motion four to five times to the distribute the lubricant within the CV joint.
10. Remove the wheel drive shaft from the bench vise.
11. Remove any excess lubricant from the wheel drive shaft.
12. Install the wheel drive shaft assembly.
*
For the left side, refer to Front Wheel Drive Shaft Replacement - Left Side (See: Service and Repair).
*
For the right side, refer to Front Wheel Drive Shaft Replacement - Right Side (See: Service and Repair).
