CTS Sedan AWD V6-3.0L (2010)
Support - Half Shaft/Short Shaft: Service and Repair
Front Wheel Drive Intermediate Shaft Bearing Replacement
Special Tools
*
J 45019 Flange and Pinion Cage Remover
*
J 21474-20 Bushing Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the left front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement - Left Side (See: Service and Repair).
3. Remove and discard the intermediate wheel drive shaft retaining ring (2) and the O-ring (1).
4. Remove the intermediate shaft bearing assembly mounting bolts.