CTS Sedan AWD V6-3.0L (2010)
3. Hand tighten the wheel bearing/hub assembly mounting bolts (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Tighten the wheel bearing/hub bolts to 140 Nm (103 lb ft).
5. Install the rear brake rotor. Refer to Rear Brake Rotor Replacement (JE5, J55) (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement)Rear Brake Rotor Replacement (J56) (See: Brakes and
Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement).
6. Install the wheel drive shaft nut. Refer to Rear Wheel Drive Shaft Replacement (See: Axle Shaft Assembly/Service and Repair).
7. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement (See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Wheel Speed Sensor Replacement).
8. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
9. Remove the support and lower the vehicle.