cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Shifter M/T > < Exploded Views|Page 6259
Page 2
background image

1. Install the TFT sensor (3) and tighten the sensor to 18 Nm (13 lb ft).
2. Connect the TFT sensor electrical connector.
3. Fill the transmission to the proper level. Refer to Transmission Fluid Replacement   (See: Service and Repair/Removal and Replacement/Tremec

6-Speed - Manual Transmission/Transmission Fluid Replacement).

4. Remove the drain pan.
5. Lower the vehicle.

Shifter M/T > < Exploded Views|Page 6259