CTS Sedan AWD V6-36L (2011) - Rear Subframe Service and Repair
13. Disconnect the intermediate park brake cable (2) from the front park brake cable connector.
14. Remove the intermediate park brake cable from body bracket.
15. Position the frame support table J 39580 .
16. Remove the frame to body mounting bolts (4) and washers (3).
17. Carefully raise the vehicle from the rear frame assembly.
18. Remove the following components from the rear frame:
*
Headlamp Leveling Rear Suspension Height Sensor Replacement
*
Lower Control Arm Replacement
*
Upper Control Arm Replacement
*
The rear brake pipes
*
Parking Brake Rear Cable Replacement - Left Side or Parking Brake Rear Cable Replacement - Right Side
*
Stabilizer Shaft Replacement
*
Adjust Link Replacement
*
Trailing Arm Replacement
*
Stabilizer Shaft Link Replacement
*
Rear Brake Caliper Replacement
*
Rear Brake Rotor Replacement
*
Differential Replacement
19. With the aid from an assistant, remove the frame from the hydraulic jack.
Installation Procedure