CTS Sedan RWD V6-3.0L (2010)
2. Install the brake caliper (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Assemble the brake hose fitting bolt (1) and 2 new brake hose fitting gaskets (2) to the brake hose (3) and tighten the fitting bolt to 49 Nm (36 lb
ft).
Note: If reusing the brake caliper guide pin bolts, the threads of the brake caliper guide pin bolts and the threads of the guide pins must be free of
residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.
4. If reusing the caliper pin bolts, prepare the bolts and the guide pins for assembly:
*
Thoroughly clean the residue from the guide pin bolt threads by using denatured alcohol or equivalent and allow to dry.
*
Thoroughly clean the residue from the guide pin threads by using denatured alcohol or equivalent and allow to dry.
5. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488), or equivalent to 2/3 of the threaded length of the brake caliper guide pin bolts.
Ensure there are no gaps in the threadlocker along the length of the filled area of the bolts.
