CTS Sedan RWD V6-3.0L (2010)
4. Install the master cylinder reservoir (1).
Carefully press the reservoir straight downward.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the master cylinder reservoir bolts (1) and tighten to 8 Nm (71 lb in).
6. Connect the brake fluid level indicator switch electrical connector.
7. Fill the master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (See: Procedures/Master Cylinder Reservoir Filling).
Master Cylinder Replacement
Master Cylinder Replacement (LHD)
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
