CTS Sedan RWD V6-3.0L (2010)
5. Remove the brake pressure modulator valve (BPMV) assembly bracket bolt (1).
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
7. Remove the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair).
8. Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair).
9. Remove the washer solvent container fasteners and position the washer solvent container aside. Refer to Windshield Washer Solvent Container
Replacement (With CE4) (See: Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent
Container Replacement (With CE4))Windshield Washer Solvent Container Replacement (Without CE4) (See: Wiper and Washer
Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent Container Replacement (Without CE4)).
10. Remove the BPMV bracket nuts (1).
11. Carefully lift the BPMV assembly from the bracket studs.
