CTS Sedan RWD V6-3.0L (2010)
4. Connect the radiator inlet hose to the radiator. Use J 38185 to position the radiator inlet hose clamp to secure the hose.
5. Connect the surge tank inlet hose to the radiator. Use J 38185 to position the hose clamp to secure the hose.
6. Install the radiator/condenser upper support.
7. Install the radiator support brackets.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Install the radiator support bracket bolts and tighten to 9 Nm (80 lb in).
9. Raise and support the vehicle.
