CTS Sedan RWD V6-3.0L (2010)
12. Connect the purge line (1) to the intake manifold (2).
13. Install the purge solenoid valve bracket and bolts to tighten to 23 Nm (17 lb ft).
14. Connect the brake booster vacuum hose (1) to the power steering booster pump (3) and the intake manifold (2).
15. Install the air outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LF1) (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair)Air Cleaner Outlet Duct Replacement (LLT) (See: Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).
Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LP1, LY7) (See: Powertrain Management/Fuel Delivery
and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement)Fuel Injector Sight Shield Replacement (LLT) (See:
Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
